Diversey Cleaners

• Powerful One Step Hospital grade Disinfectant Cleaner that is Virucidal, Bactericidal, Fungicidal and Mildewcidal.
• Oxivir Five 16 is effective against a wide spectrum of pathogens including VRE, MRSA, Klebsiella, Acinetobacter, Pseudomonas, E.coli, Norovirus, Hepatitis B, Influenza A, RSV, Human coronavirus 229E
• Delivers fast and effective cleaning and disinfection
• Approved for Cleaning Interiors of Commercial Transport Aircraft – meets Boeing D6-7127 Revision M at dilution 1:128
• Low in odour and non-irritant - safe for staff and patients
• Non -corrosive - safe on most surfaces
• No rinsing required
• Active ingredient, Hydrogen peroxide breaks down to bio-degradable oxygen and water

• Healthcare (Hospitals, Nursing Homes, Medical Establishments)
• Child Care Centres
• Government
• Education

• Provide log 3 reduction of microbial load
• Unique combination of quaternary ammonium compound and nonionic surfactant makes the formula potent to do cleaning and sanitation at 20% concentration.
• Water hardness sequester which sequests 50 ppm of water hardness at 2% concentration to avoid water hardness scale deposition.
• Concentrated for economy of use. When used as recommended (for normal soiling), TASKI R1 will cost
• Does not contain any abrasive, hence will not scratch bathroom surfaces.
• Quickly remove skin oils, stains, dirt and water-marks.
• Cleans and sanitises in one action.
• QAC sanitizers are safe on bathroom accessories and provide sanitization to commonly found
• microorganisms in the rest room.
• Leaves bathroom fittings clean and shiny.
• Pleasant, fresh Room Care fragrance.

•  Spray Taski R1 Super onto clean cloth /sponge. 
• Apply Taski R1 Super to all surfaces to be cleaned (sink, tub,tile). 
• Mildly scrub to remove dirt, stains etc. 
• Pay special attention to taps, soap holders and another metal surfaces. 
• Rinse with plain water. 

Product Details:
Taski R6 is an effective toilet cleaner specially formulated to remove lime-scale deposits and stubborn stains. It leaves toilet bowls and urinals sparkling clean. 

Direction For Use:
Taski R6 is a ready-to-use product. Shake well before use. Flush the toilet or urinal. Squirt Taski R6 from the specially designed squeegee-bottle under the rim, around the bowl, onto water / flush paths and around water outlets. Leave to activate for a few minutes (5 to 10 minutes of contact time, depending upon the bowl condition). Scrub the inside of the bowl with the brush to remove difficult stains. Then flush to rinse the toilet / urinal.

Features and Benefits:

• Regular use prevents lime-scale build-up. 
• Ideal viscosity for extended contact time. 
• Squeegee-bottle with directional spout, enables fast and easy application.
• Colour and alpha-numeric codes to prevent application mistakes. 

Safe Handling and Storage Information: Irritant. Irritating to eyes and skin. Wear suitable gloves. In case of contact with eyes, rinse immediately with plentyof water and seek medical advice. Do not use on acid-sensitive surfaces. Immediately remove any drops or splashes and rinse with water. Do not mix with bleaches or other cleaning products. Store in a cool, dry place awayfrom sunlight.

• Quickly achieves a mirror-like shine thanks to a combined chemical and mechanical action.
• Reduces water and dirt penetrability, thus facilitating daily cleaning and maintenance.
• Increases contour acuity and intensifies the natural appearance of the stone.
• Significantly improves slip-resistance

• Make the solution with 3 parts of powder and 1 part of water. Slowly add the water to the powder and shake the mixture to a homogeneous paste. Please ensure that the paste is shaken vigorously to ensure smooth dispersion. When the paste has to applied on the surface shake the mixture adequately so that the crystals don’t settle down and are adequately spread over the floor.

• If the floor has visible scratches, then hone the surface using 400 grit diamond pad for 2 mins per sqm and followed by 1800 or 2000 grit diamond pad for 5 mins per sqm before subjecting to the crystallisation.
• Use 1% neutral cleaner solution and clean the surface using single disc machine with red pad and then vacuum it. Ensure proper rinsing with water to remove all dirt particles. Prepare paste by taking 3 parts of Nobile Plus and 1 part of water. Use 40 gm paste per sqm.
• Damp the floor using wet mopping. Ensure it is just moist and no excess water on floor. Its extremely important to have the floor slightly moist before the application of Nobile Plus.
• When the paste has to applied on the surface shake the mixture adequately so that the crystals don’t settle down and are adequately spread over the floor. Begin spreading the paste equally over the entire area to be treated. Place a Single disc machine, fitted with a red pad, directly on top of the paste.
• Buff for 5–6 mins per sqm. Do not allow the paste to dry. Sprinkle a little water whenever required to maintain a creamy paste.
• At the end of crystallisation, dilute the slurry with fresh water, pick it up with a wet vacuum cleaner. Flood and agitate the section thoroughly with plenty of neutral cleaner solution to ensure complete product rinse-off. Remove the solution with a wet vacuum cleaner.
• After the floor dries completely, dry buff with a single disc machine, 200–1500 rpm, fitted with a soft white pad.

• Store in original closed containers, away from extremes of temperatures. Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data.

• For scratched surfaces, grinding is recommended before the crystallization. Use only on calcareous stone floors, e.g. marble, travertine. Protect other surfaces from splashes. Use paste immediately after preparation. Keep container tightly closed.

• Normal soiling: 20 ml. in 1 litre of water. 
• Heavy soiling : 50 ml. in 1 litre of water.

• Concentrated for economy of use. When used as recommended (for normal soiling), Taski R7 will cost less than Rs. 2/- per litre of user solution.
• Can be used for manual cleaning as well as machine cleaning.
• Pleasant Room Care fragrance.
• Colour and alpha-numeric codes to prevent application mistakes.
• Neutral Cleaner

• Kills 99.9 percent pathogenic bacteria
• Removes stubborn stains
• User friendly, accurate dispensing pack
• Refreshing fragrance
• Works for all water conditions
• Concentrated Hard Surface Cleaner

• Contains bactericide 
• Non abrasive           
• Unique fresh "Room Care" perfume range
• Biodegradable 
• Colour coded alpha numeric label

• Kills a wide range of germs.
• Removes body fat deposits without surface damage
• Consistent "Room Care" aroma, matches the total 
• Environmentally acceptable.
• Easy identification-assists staff training

• R2 Hygienic hard surface cleaner is ready to use; apply undiluted. 

• Small areas: Spray a small quantity onto a damp cloth/sponge pad and clean the surface. Rinse with fresh water or wipe with a clean, damp cloth. Buff with a dry cloth for extra shine. 
• Large surfaces (wet cleaning): Add 100-200ml of product per 5L water into a bucket. Use a sponge, cloth or wet mop to apply the solution and to clean the surface. Rinse with fresh water or wipe with a damp (rinsed in fresh water and wrung) cloth or wet mop. Buff with a dry cloth for extra shine.